Welcome to Fusion Models.
We aim to provide the very best Scale and Semi Scale models and accessories from around the world with the very best customer care we can possibly supply.

Airwild Servo Trays

see ACCESSORIES for the installation parts.

  • AirWild MLP Alu. Bellcrank Rudder Servo Tray Assembly
  • Manufacturer: AirWild Hobbies
  • Product: MLP Bellcrank Rudder Servo Tray Assembly
  • Material: Aluminum
  • Construction: CNC Machined
  • Bellcrank Arm Styles: Straight, Offset
  • Bellcrank Support: Ball Bearing
  • Servo Bay #: 2, 3, 4
  • Servo Sizes: Standard, Futaba S9152
  • Oversized: No
<

At the heart and soul of the tray assembly is an innovative aluminum bellcrank arm employing the patented AirWild MLP control geometry. MLP stands for Minimal Lateral Play and is a patented AirWild design that significantly increases control precision and at the same time reduces play in mechenical movement of pivotal control arm such as servo arm or bellcrank.

To further improve movement accuracy and maximize performance MLP bellcrank arm is mounted on a ball-bearing supported aluminum output shaft. The entire shaft base has lightened features in strategic places to eliminate any dead weight yet without sacrificing structrual integrity.

In addition to those obvious design features, we also thoughtfully address the not-so-obvious, but little nicety to have. As you may have noticed in the photo illustration we added a small notch in the servo mounting cutout. This little extra clearence allows the bulky strain relief of the servo pigtail to easily clear the cutout and make installing servo a snap.

Two servo cutout sizes available. STANDARD cutout is for all standard case size servos including JR 8611. For those Futaba users, don't worry 'cause we also have a special cutout for your favorite FUTABA S9152 high torque digital servo.

    Features Outline

  • Bellcrank arm pre-tapped #4-40 holes for securing ball links or other mounting hardware
  • Bellcrank arm designed to with 2.5-in. rudder servo arm
  • Servo mounting holes pre-tapped for #2-56 screw
  • Tray mounting hole accepts #6 screw (0.138 in. dia.)
  • Bellcrank arm available in STRAIGHT or SWEPT-BACK style
  • Servo cutout available for STANDARD or FUTABA S9152 size
  • STRAIGHT MLP Bellcrank Arm
  • Maximum 5-in. bellcrank span
  • Additional mounting points for 4.5 in. & 4.0 in. span setup
  • One bellcrank, three flexible configurations (5, 4.5, 4)
  • Use 2.5-in. full servo arm for rudder servo setup
  • For non-offset rudder horn setup and/or parallel pull-pull cable application
  • SWEPT-BACK MLP Bellcrank Arm
  • Actual span shorter than 5 in. due to swept-back design
  • Offset 0.43 in. / 11mm from pivot line
  • Use 2.5-in. full servo arm for rudder servo setup
  • For offset rudder horn setup and/or cable crossing application


Part Number Servos Servo Arm Style and Size oz / gm
AW60-120-01 2 Straight Standard 1.82 / 52
AW60-121-01 2 Offset Standard 1.82 / 52
AW60-128-01 4 Straight Standard 2.45 / 70
AW60-129-01 4 Offset Standard 2.45 / 70
AW60-122-01 2 Straight Futaba S9152 2.01 / 57
AW60-123-01 2 Offset Futaba S9152 2.01 / 57
AW60-126-01 3 Straight Futaba S9152 2.31 / 66
AW60-127-01 3 Offset Futaba S9152 2.31 / 66

1. For three (3) standard servo application, use 4U tray and depopulate one servo.

2. Complete hardware package available for JR, Futaba & Hitec servos in all configurations. Package includes items listed below. Choose the package for the servo brand you intend to use:

  • AirWild MLP servo arm, 2.5 in.
  • Titanium Pro-Link push rod, 1.5 in.
  • Heavy-duty 1/4 ball links, single ended
  • Socket head cap screws, #4-40, #2-56
  • Flat Washers, #4 & #2
  • Heavy-duty 1/4 ball links, double ended
Options:
MLP Bellcrank Rudder Servo Tray, 2U, Straight Part No.: AW60-120-01 POA
MLP Bellcrank Rudder Servo Tray, 2U, Offset Part No.: AW60-121-01 POA
MLP Bellcrank Rudder Servo Tray, 4U, Straight Part No.: AW60-128-01 POA
MLP Bellcrank Rudder Servo Tray, 4U, Offset Part No.: AW60-129-01 POA
MLP Bellcrank Rudder Servo Tray, 2UX, Futaba S9152, Straight Part No.: AW60-122-01 POA
MLP Bellcrank Rudder Servo Tray, 2UX, Futaba S9152, Offset Part No.: AW60-123-01 POA
MLP Bellcrank Rudder Servo Tray, 3UX, Futaba S9152, Straight Part No.: AW60-126-01 POA
MLP Bellcrank Rudder Servo Tray, 3UX, Futaba S9152, Offset Part No.: AW60-127-01 POA
2-Servo Hardware Pack, JR Part No.: AW60-120-01HJ POA
2-Servo Hardware Pack, Futaba Part No.: AW60-120-01HF POA
2-Servo Hardware Pack, Hitec Part No.: AW60-120-01HH POA
3-Servo Hardware Pack, JR Part No.: AW60-124-01HJ POA
3-Servo Hardware Pack, Futaba Part No.: AW60-124-01HF POA
3-Servo Hardware Pack, Hitec Part No.: AW60-124-01HH POA
4-Servo Hardware Pack, JR Part No.: AW60-128-01HJ POA
4-Servo Hardware Pack, Futaba Part No.: AW60-128-01HF POA
4-Servo Hardware Pack, Hitec Part No.: AW60-128-01HH POA
2-Servo Hardware Pack, Futaba 9251 Part No.: AW60-122-01HXF POA
3-Servo Hardware Pack, Futaba 9251 Part No.: AW60-126-01HXF POA
Pull-Pull Cable, 30 ft., 60 lb. Part No.: 60WN POA
AirWild Heavy Duty Cable Attach Fitting, #4-40 (4) Part No.: AW60-091-01 POA
AirWild Cable Attach Fitting, #4-40 (4/Pkg) Part No.: AW60-090-01 POA

Home